Pellet Stove Repair in Woodland Hills With the Fault Named First

A pellet stove that will not start usually has a dead igniter, a dirty burn pot or a tripped safety switch. One that starts and shuts down often has a failing combustion blower, a vacuum switch reading wrong because the vent is clogged, or a sensor out of range. One that feeds unevenly may have a jammed auger or damp pellets. We read any error code, test the parts with a meter and look at the vent. Guessing by swapping parts gets expensive fast on these stoves.

Pellet stoves are less common in Woodland Hills than open fireplaces, and parts for some brands take a few days to arrive. We keep igniters and common switches on hand. For the rest, we tell you the price and the wait before ordering, so there is no surprise on either.

A good share of pellet stove calls turn out to need cleaning, not parts. Ash builds up in the heat exchanger, the burn pot and the vent, and the stove starts to struggle. A thorough cleaning costs less than most repairs and often solves the problem. We will tell you when that is the case and price it that way.

When a part has failed, the estimate shows the part, the labor and anything else we noticed, such as a vent joint that needs resealing. You decide what gets done and when. If the stove is old and the board is no longer made, we will give you an honest view on whether to repair it or replace it.